An innovative enterprise specializing in the R&D and production of acidic catalytic materials, catalysts, and molecular sieve products.
Efficient Utilization of Organic Waste Gas Purification and Recovery Equipment
Release time:
2021-02-07
After shot blasting, the steel materials are sent into a cleaning chamber, where roller brushes remove any residual shot media from their surfaces. Then, powerful air jets blow from all directions at the workpieces, thoroughly cleaning their surfaces to meet the cleanliness standards required for painting.
After shot blasting, the steel materials are sent into a cleaning chamber, where roller brushes remove any residual shot media from their surfaces. Subsequently, powerful air jets blow from all directions to thoroughly clean the workpiece surfaces, ensuring they meet the cleanliness standards required for painting.
Regardless of the heating method used, the steel plate temperature should be maintained at around 40℃. If the temperature is too low, it will hinder the removal of moisture and oil contamination as well as the drying of the primer applied in subsequent steps. On the other hand, if the temperature is too high, it will lead to excessive energy consumption and cause bubbling during the paint-drying process.
Among the methods available, only shot blasting can currently achieve highly efficient and high-quality automated production processes.
As the rough surfaces are smoothed, failed parts are replaced, and the installation undergoes running-in adjustments, operators gradually become familiar with the equipment, and the rate of equipment wear gradually slows down.
Exploration of Catalyst Selection for Low-Temperature SCR Denitrification in Coking Processes
As the national environmental emission standards continue to tighten, NOx emissions are receiving increasing attention from both the government and the industry, and denitrification methods centered on selective catalytic reduction (SCR) are becoming a prevailing trend.
2021-02-07
Design Principles for Industrial Waste Gas Treatment 1) The process should be mature and operate with stable and reliable performance. 2) The system should be easy to manage, operate, and maintain, with a high degree of automation to minimize secondary pollution. 3) The system should require minimal investment and have low treatment costs whenever possible.
2021-02-07
Three Things You Must Pay Attention to When Installing Exhaust Gas Treatment Equipment
When installing environmental protection technology equipment, there are actually three key things our installation team must get right: First, ensure precise alignment with the centerline; second, pay close attention to horizontal levelness; and third, adjust for any deviations in elevation. If these three aspects are handled correctly and thoroughly, installing exhaust gas treatment equipment will become remarkably straightforward.
2021-02-07
Contact Us
Phone:+86-15660610666(Shen)
Phone:+86-18129710700(Chen)
Postal code: 458008
Email:hnbjhg@126.com
Address: Meihua Avenue, Baoshan Circular Economy Industrial Cluster Zone, Hebi City, Henan Province
ZhenHua Packing Machinery
Online Message
*Note: Please be sure to fill in the information accurately; we will contact you as soon as possible.